For use with the MCR Venting Kits. This adapter will create a simple, cut edge (often referred to as a “raw” edge) at the top of your kit which can be inserted into or modified onsite to connect to a different single-wall or double-wall ducting system/type. Typical to your venting kit, the rolled edge on the bottom of the adapter is clamped to the rolled edge on top of the branch at the end of your kit. (1) clamp is included with purchase of this adapter.
All adapters are galvanized. 8” and 4” adapters are 4” tall. 6” adapter is 3” tall. If inserting the adapter inside another ducting system, plan heights accordingly to allow for the clamp connection at the bottom. Connections can be made with silicone sealer or self-tapping screws as required on site.
Diameters of “raw” edge (Inside and Outside)
8” Adapter: 7.86” ID - 7.93” OD
6” Adapter: 5.86” ID - 5.93” OD
4” Adapter: 3.82” ID - 3.89” OD
$40 – $50
was last modified: November 19th, 2018 by Nick Green